Publicidad
R E P L A C I N G K E Y C A P S A N D S W I T C H E S
For a full guide on how to remove keycaps and switches scan the QR Code or type in your
browser:
https://epomaker.com/blogs/guides/diy-guide-how-to-remove-and-replace-your-mechanical-keyboard-
switches
Before installing switches, be sure the pins are clean and straight.
Included
Tools
Switch Puller
Keycap Puller
Remove Switches
1. Grab your Switch Removal Tool and align the gripping teeth
vertically (on the Y-Axis) at the center of the switch, as shown in
the example graphic above.
2. Grab the switch with the Switch Puller and apply pressure until the
switch releases itself from the plate.
3. Using firm but gentle force pull the switch away from the keyboard
using a vertical motion.
Note: If the key doesn't work its possible you may have bent one of the switches while installing it. Pull the switch out and repeat the process.
Pins may be damaged beyond repair and need replacement if this process is not done correctly. Never apply excessive force when replacing
keycaps or switches. If you cannot remove or install keycaps or switches please contact customer service as soon as possible to avoid
damage to the keyboard due to operating errors.
Mechanical
Switch
Example of a switch
as seen from top
after you remove the
keycap to prepare for
switch removal.
The Switch Puller tool aligns Vertically to the Switch to
unclip the plastic securing the switch to the plate.
Install Switches
1. Check that all the switch metallic pins are perfectly straight and clean.
2. Align the switch vertically to have the Gateron logo facing north. The
pins should align themselves to the keyboard PBC.
3. Press the switch down until you hear a click. This means your switch
clips have attached themselves to the keyboard plate.
4. Inspect the switch to ensure it's properly attached to your keyboard,
and test it.
Push Straight
Down
Please be gentle. Be sure the
pins are aligned with the slots.
Logo
Switch Shaft
T E C H N I C A L A S S I S TA N C E
For technical assistance, please email to
support@epomaker.com with your purchase order number
and a detailed description of your issue.
We normally respond to enquiries within 24 hours. If you
purchased your keyboard from a distributor or not from any
additional help.
C O M M U N I T Y F O R U M S
Join our community and learn together with
other keyboard enthusiasts.
https://discord.gg/2q3Z7C2
https://www.reddit.com/r/Epomaker/
W A R R A N T Y
EPOMAKER's Warranty covers any factory defects that
doesn't cover any damage that may occur from normal
wear and tear. If your product is defective we will send you
a replacement unit. Replacement units might require you
to send the defective unit back to Epomaker.
We provide a 1 year warranty for our products when
bought from our website (EPOMAKER.com). Your item will
not be covered by your 1 year warranty if the inspection
by the original product, these include: Changing internal
components, Assembling and reassembling the product,
Replacing Batteries, etc.
stores. You do not have a warranty with us if you bought
the item from another reseller or likewise. Please contact
the store that you bought your product from to resolve
issues.
EN
Publicidad
