Publicidad
the hole (see figures 3, 4, 5). Fix the leg to the support frame by gently moving
the tube to fix it against the opening of the support frame (6, 7,8).
Step 3: Insert the stoppers into the plastic lugs and fix them well with a bolt
(see figure 9). Secure the lugs to the chair legs with light pressure so that the
pin fits into the corresponding hole (see figure 10).
Step 4: Carefully place and secure the feeding tray to the structure, then
ensure that it is firmly engaged and secured using the button on the bottom
of the tray (see figures 11, 12).
Attention! Use the tray always in combination with safety belts! The tray is not
intended to protect the child from falling.
Using the seat belt: The five-point seat belt is designed to ensure the safety of
your child and must be used at all times. Unbutton the mechanism before
placing the baby. To unfasten the belt, press the buckle button and pull the
fastener. To fasten the belt, insert the belt buckles at the waist into the holes
in the buckle and press until they lock. Place the baby and fasten the belts (you
will hear a "click" sound when properly fixed in the buckle). Sliding controls are
mounted on the straps and waist belt. The straps should be carefully adjusted
to the child's comfort. Check the restraint system by pulling it slightly away
from your child. The restraint system must remain attached.
INSTRUCTIONS FOR MAINTENANCE AND CLEANING
Clean the plastic parts of the product with a soft cotton cloth or sponge
moistened with water or a mild detergent. Do not use bleach, agressive
detergents or abrasive products to clean the product. Regularly check fixed
and moving parts for looseness, damage or breakage. Do not repair the
product yourself, but contact an authorized service center or the sales agent
from whom you purchased the product. Otherwise, your warranty will be void.
Periodically clean the product. Do not leave the product to the harmful effects
of external factors - direct sunlight, rain, snow or wind. This can damage metal
and plastic parts and bleach upholstery. Store the product in a dry and
ventilated place, not in dusty, damp rooms with very low or very high room
temperatures.
Manufactured for Cangaroo in PRC
Manufacturer and Importer: Moni Trade Ltd.
Address: Bulgaria, Sofia, Trebich, 1 Dolo Str.,
Phone number: 003592/936 07 90, Website:
www.cangaroo-bg.com
16
Publicidad
