OPERATION
Paper / Credit Card Entry:
Make sure you do not exceed sheet
count per pass (8 sheets max).
Insert paper as straight as pos-
sible into feed slot and release.
NOTE:
• Always turn off and unplug the shredder when not in use.
• This shredder will shred staples and small paper clips. It is recommended that you remove paper
clips whenever possible to extend the lifespan of your shredder.
• Only shred credit cards by feeding them vertically i nto the middle of the entry, releasing when shred
ding begins. Never feed more than one credit card at a time.
• Overfeeding the shredder: Shredding beyond the specified sheet capacity can result in extensive
damage to the shredder. Overfeeding will strain the machine and quickly wear and break the cut-
ting blades and internal components.
• Overheating with extended use: In the event that the shredder has shred continuously beyond the
maximum running time and overheating, the unit will automatically shut off. If this happens, switch
the shredder Off for 15 minutes or longer before resuming normal operation.
6
ENGLISH
Lift safety cover to expose the CD/DVD entry. Press the CD Destroyer/
Reset button to activate the shredding feature. Hold the CD/DVD by the
edge and feed one at a time into the slot. You may have to gently push
the disc down to engage the cutting blades. Release the button once the
entire CD/DVD has passed through and destroyed. Close cover when
done shredding media.
Insert one credit card at a time into
the middle of the feed slot. (basket
not included)