Jimmy BX6 Pro Manual Del Usuario página 4

Cautions
Please read this instruction manual carefully before use, properly save and store it for future
use.
The product design and spec in the manual may slightly vary from the actual product. Please
take physical product shall prevail.
Never leave the machine working without supervision.
Please turn off the power switch and unplug the power cord if the machine is to be idled. Do Not
unplug the power cord with humid hand in case of electric shock.
Cut off power when machine is under cleaning, repairing or is not used.
Keep the power cord away from sharp objects and do not drag the cord to move the machine in
case of cord damage.
For safety reasons, please do not use the product to clean hot objects such as carbon, cigarette
butts, sharp objects such as broken glass, corrosive liquids, flammable and explosive materials
such as gasoline and alcohol. Otherwise it may cause product damage or fire.
Do not use this machine to pick up water or wet dust, and avoid the machine from being
exposed to rain, water or being used in wet places (such as bathrooms, washrooms, laundry
rooms, etc.) to avoid failure.
Avoid the product approaching heating appliances or being exposed to the sun to avoid fire.
Do not let children play with or operate the product to avoid accidents.
Avoid product running for a long time when the suction port is blocked to avoid damage.
The product is equipped with UV light.Do not view the bottom of the machine when the power is
turned on to prevent UV rays from causing harm to human body.
Please do not let UV light shine on plants to avoid damaging them. Do not concentrate UV light
in one place for continuous use, which may cause damage to the cleaned objects.
Do not sit on the product to avoid damage.
Do not remove brushroll when machine is powered on or running to avoid damage.
This product can only use for cleaning of textiles such as mattresses, blankets, pillows, sofas,
etc.
If there is damage on power cord, to avoid danger, it should be replaced or repaired by
manufacturer, repairing agency or professional person.
2