Atlantic 74094 Manual Del Producto página 3

Connecting Lighting To Module
Apply dielectric grease to the pins of the plugs on the InfiColor Smart Module and light cords.
Line up the keys; the plugs will only fit one way. Connect the plugs and tighten the threaded
ring. Complete the tightening process by wiggling the connection and retightening the
threaded ring 2-3 times until firmly seated.
INFICOLOR MOBILE APP
To connect your mobile device to the Smart Module, be sure the Module is plugged in and
open the InfiColor App. The app should populate your Smart Module on the opening screen.
Simply select the Module name. Please note the Module can be connected to one mobile
device at a time. The Single Zone Module will only modify the settings of Zone 1 on the app.
To Configure Zone Name and Timer
Click dropdown menu. Edit the name of the zone on the "Zone Settings" page. This zone
name will be visible throughout the app. The zone has a timer function to turn the zone on
and off at set times. Click the "Save" button to save changes. A box will come up confirming
the settings have been saved. Click the "Back" button once configuration is complete.
Color Tab
Use the Color tab to choose colors using either the color picker or the red, green and blue
sliders at the bottom. Choose the brightness of the color by adjusting the slider.
Favorites Tab
The Favorites tab stores preset color changing sequences. Choose a sequence of colors, then
choose the transition between them, the speed of the sequence and the brightness. The Edit
button deletes stored Favorites.
Custom tab
The Custom tab creates and stores a custom color changing sequence. Move the red, green
and blue sliders to choose a color, or select it from the color picker. Click the "Plus" button to
add it to the sequence. Repeat as desired. Add up to 10 colors to a sequence. Once the
sequence has been created it can be named and saved. The saved sequence will be available
on the Favorites page.
Maintenance
Replacement LED diode assemblies are available for Pond Lights. Loosen clear plastic lens and
remove diode assembly. Install new LED diode assembly and align gasket. Tighten clear plastic
lens. Ensure that all components are installed correctly after servicing. Ensure that the clear
plastic lens is tightly
secured before submersing
the fixture.
Winterization
Pond Lights may not be left where water freezes solid. If lights are installed in shallow streambed
waters or close to the surface, they should be removed from the pond for the winter or relocated
to deeper areas that do not freeze.
Warranty
All Atlantic Pond Lights carries a one-year limited warranty.
All Atlantic Wiring Components carry a one-year limited warranty.
This limited warranty is extended solely to the original purchaser commencing from the date on
the original purchase receipt and is void if any of the following apply:
Light
Body
LED Diode
Silicone Gasket
Assembly
Clear Plastic Lens
3