Publicidad
Idiomas disponibles
Idiomas disponibles
B. PLATFORM
The Universal Go Up platform is the best way of making it possible for
your pushchair to carry a second child.
The platform is designed for children from 2 years old and weighing
up to 20 kg.
C. COMPATIBILITY
This platform is designed to be fitted easily onto different types of
pushchairs.
See the TABLE OF USE ACCORDING TO THE TYPE OF CHASSIS and PO-
SITION OF THE CHILD.
For pushchairs with a brake pedal, you may have to raise the platform
in order to use the brake.
D. ASSEMBLING THE PLATFORM
Insert the metal wheel shaft (2) into the holes in the platform (1) until
you hear them click into place.
1a
Fit the extension arms (3) onto the platform while pressing the ad-
justment button (4). The arms must NOT be outside the limit marked
"max."
1b
30
EN
E. PUTTING THE RINGS ON THE CHASSIS
Insert the toothed belt through the slot until it engages with the tighte-
ning wheel
Turn the wheel clockwise to fix it to the tube firmly.
2a
Pull the toothed strap firmly.
WARNING: The connectors should not interfere with the folding
!
of the pushchair or the braking system. If they do, you need to
reposition the rings.
F. FITTING THE PLATFORM
Position the platform in front of the rear wheels of the
pushchair and press the adjustment button to approximately
adjust the width of the arms.
3a
Release the cams (9) on both arms.
3b
Press the hook release
button (10) found just below the hook (8) in order to open it.
Fit the hooks through the rings (7) and click them fastened into
place.
3d
Find the perfect position so the platform is level (parallel to
the ground) and as close as possible to the pushchair. Adjust
the height of the hooks (8) by pressing the metal button on the
underneath of the hooks.
3e
Lock the cams (9) to fasten the
arms into the required position.
3f
2b
Make sure that both arms are the same distance from the
centre of the platform and that the hooks are correctly
fastened through the rings.
The Go Up platform is now ready for use.
WARNING: Never fold the pushchair with the platform still
!
attached. If you want to fold the pushchair you must first
detach the platform and just leave the rings fastened on
the chassis.
Once you have connected the Go Up to the pushchair, you need
to check the functioning with one child on the Go Up and anoth-
er child sitting in the pushchair. The child on the Go Up must be
comfortable and you have to be able to handle the pushchair
easily. You may have to adjust the Go Up placing the platform
nearer or further away from the pushchair.
3c
G. DETACHING THE PLATFORM
Press the buttons (10) found under the hooks (8) to open them and dis-
4a
connect them from the rings.
If you want to take the rings off the pushchair chassis, turn the ring
anticlockwise and release the toothed strap.
H. RESTING POSITION
Go Up is fitted with an adjustable strap (11) so it can be folded away
when not in use.
5a
Fasten the strap onto the right side tube of your pushchair. Insert the
5b
elastic band through the buckle as shown in diagram
and secure
the elastic band in the clip underneath the platform
. Adjust the
5c
length of the strap with the buckle if necessary.
5d
To unfold, release the elastic band from the platform clip.
I. MAINTENANCE
Keep the metal parts clean and dry to prevent them from getting rusty.
Lubricate the mobile parts regularly with silicone spray.
Do not use oil or grease. To clean the plastic parts just use a mild de-
tergent and warm water. For your safety and for correct maintenance
it is advisable to take your product to one of our official repair shops
for regular inspections.
EN
31
Publicidad
