HAEGER HC-03W.010A Instrucciones De Uso página 10

English
I
NSTRUCTIONS FOR USE
Attaching and removing the trimmer attachments (Fig.13 – 16)
NOTE: Always ensure the personal groomer is switched off before changing any
attachments.
To attach - place the desired trimming head on top of the groomer and rotate
clockwise to lock onto place.
To remove - hold the personal groomer with one hand and turn the trimmer head
anticlockwise with the other.
Attaching and removing the guide combs (Fig.17 – 24)
To attach - With the trimmer blade facing away from you, slide the guide comb on
top of the clipper blade and click into position.
To remove - With the trimmer blade facing away from you, carefully push the guide
comb away from the trimmer blade.
Pressing the adjustment button on the back of the comb will alter the cutting length
increment, this is indicated on the comb.
Before you begin
Comb facial hair with a fine comb before you start trimming.
Always comb your beard or moustache with a fine comb before you start trimming.
Hairs should be dry and without any waxes or lotions before using the groomer.
To thin and taper the beard/moustache (Fig.1)
1. Attach a guide comb to full size trimmer (fig.17). If you are trimmer for the first
time start with the maximum trimming length setting. (from 12 to 24mm in 10
steps) (Fig.18-20).
2. Turn the unit on and place the flat top of the trimmer comb against the skin.
3. Slowly slide the personal groomer through the hair. Repeat from different
directions as necessary.
4. If hair builds up in the trimmer comb during the trimming process, switch the
unit off, pull off the comb and brush/rinse off. (Fig. 25-26)
To define the beard/moustache line (Fig.2)
1. Attach the precision trimmer attachment. (Fig.13-16)
2. Hold the personal groomer with precision trimmer blade facing you.
4 Instructions for use