Makita DRT50 Manual De Instrucciones página 8

6. Slide the depth pointer so that the pointer indi-
cates "0" on the scale.
► 1. Depth pointer
7. Adjust the cutting depth by pulling up the stopper
pole while pressing the feed button.
1
2
► 1. Stopper pole 2. Feed button
8.
To perform fine adjustment of the cutting depth,
turn the dial on the stopper pole so that it indicates "0".
1
► 1. Dial
9. Turn the head of the stopper pole to obtain the
desired depth. To increase the depth, turn the head
counterclockwise. To decrease the depth, turn the head
1 clockwise.
1
► 1. Head of the stopper pole
10. Tighten the stopper pole fixing nut.
► 1. Fixing nut
11. Release the fixing lever.
► 1. Fixing lever
8 ENGLISH
1
1