Master audio PRO P-18CSW Manual Usuario página 38

Master Audio
2.1.3.1 Connection with a P12CSW / P15CSW / P18CSW active subwoofer
Plug into the INPUT of the cabinet (from a Mixer's output) and then use the LINK
output to carry the signal to the input of the active subwoofer.
Place the MODE switch to the 90Hz FILTER position. The low energy from the Full
Range cabinet will be cut and the overlap between both cabinets will be done in a
perfect way.
In this case the subwoofer must have the Phase switch at 180º.
Fig.11. P12CSW / P15CSW / P18CSW subwoofer with "top" cabinet at 90Hz filter.
If you use the Full Range cabinet in Full Range MODE (switch) the subwoofer
must have the Phase switch at 0º.
Fig.12. P12CSW / P15CSW / P18CSW subwoofer with "top" cabinet at "Full Range"
mode.
The levels of the subwoofer and the Full Range cabinet can be adjusted through the
Gain potentiometer.
PRO Series.Version 1.6 Mar11
38