Forging Mount HY9001-B Manual De Instrucciones página 8

2B-2
01
2B-3
2B-4
01
05
B
05
A
Position arm assembly/wall
plate [01] at your desired height.
Level the wall plate and mark
the hole locations.
Drill 3 pilot holes using a 7/32 in.
(5.5mm) diameter drill bit.
Make sure the depth is NOT less
than 3 in.(75mm).
plate [01] using lag bolts [A]
and washer [B] . Tighten the
lag bolts [A] only until they
wall plate.
3 in.(75mm)
ø7/32 in.(5.5 mm)