Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS.
1. The door of the room must be ajar without closing for greater efficiency.
2. Plug in the heater.
3. Switch on the heater with the On/Off Switch.
4. Can turn on 2 heat levels, 1000W pushing the switch 3
switches (3) and (4).
5. Adjust the desired temperature.
6. To switch off the stove, turn all the switches to OFF.
7. Unplug the power supply if you are not going to use it again. NOTE.
The replacement of the internal bulbs that simulate the lit fire, must be done
by qualified technical personnel to avoid danger and damage.
SECURITY SYSTEM AGAINST OVERHEATING.
This device has a security system that in case of overheating the device stops working
automatically.
If the device suddenly switches off, disconnect it from the electric current, wait
about 20 minutes, clean the air inlets and outlets and connect it again.
If it still does not work disconnect it and wait another 10 minutes. If
it still does not work, call the technical service for repair.
IMPORTANT SECURITY INSTRUCTIONS.
- Never leave the heater unattended while it is plugged in and switched on.
- While it is in operation, never cover it. It can cause fires.
- Always unplug the power when it is not in use.
- If you leave the heater for a moment do not leave it on, turn it off.
CLEANING AND MAINTENANCE.
- The heater must be unplugged from the electrical power and cool before proceeding to
its cleaning.
- Clean the device with a slightly moistened cloth.
- Never use abrasive or flammable products to clean the appliance.
- Never immerse the heater in water.
- Clean the grids with a duster, brush or vacuum cleaner.
- If you are not going to use your heater for a long period of time, store it in a cool, dry
place where it does not pick up dirt or dust.
SPECIFICATIONS.
- Input Power: 220V- 240V / 50 - 60 Hz.
- 2 Heating powers: 1000W / 2000W.
- Protection against overheating.
- Adjustable Temperature.
- Adjustable internal light intensity.
or 2000W pushing both
Publicidad
