Publicidad
Idiomas disponibles
Idiomas disponibles
Model #
Rating: Btu/Hr / kW
Fuel Consumption: Gal/Hr / L/Hr
Fuel Tank Capacity: Gallons / Liters
Pump Pressure: psi / BAR
Volts: AC/Hz
Amps
Phase
Upper Shell
Hot Air Outlet
Handle
Lower Shell
Lamp
Thermostat Knob
(80T KFA Only)
Fuel Tank
Power/Reset Switch
ASSEMBLY INSTRUCTIONS (140T-KFA / 190T-KFA / 215T-KFA)
1. Tilt the heater tank forward and attach the Wheel
Support Frame by inserting it into the button spring
clips at the back of the bottom support frame.
Axle Support
Tire
Axle Nut
2. Attach the axle supports by inserting them into
the button spring clips at the front of the bottom
support frame.
3. Insert the axle through the holes in the axle supports.
4. Slide the spacers onto the axle.
© 2021 Pinnacle Climate Technologies, Inc.
All manuals and user guides at all-guidesbox.com
NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR
WHILE CONNECTED TO A POWER SOURCE
SPECIFICATIONS
45-KFA
45,000 / 13.2
80,000 / 23.4
0.35 / 1.3
5 / 19
3.0 / 0.21
120VAC / 60Hz
1.4
Single
Specifications subject to change without notice.
FEATURES
Extension Cord Wrap
Fan Guard
Pressure Gauge
Fuel Gauge
Fuel Cap
Power Cord
Axle
Spacer
Figure 1
80T-KFA
140T-KFA
140,000 / 41
0.63 / 2.38
1.1 / 4.16
5 / 19
10 / 38
4.2 / 0.29
6.6 / 0.46
120VAC / 60Hz
120VAC / 60Hz
1.5
2.4
Single
Single
Fuel Cap
Upper Shell
Hot Air
Outlet
Lower Shell
Fuel Gauge
5. Slide the wheels onto the axle and secure with the
axle nuts.
6. Attach the rear handle by inserting the handle into
the button spring clips at the rear of the top support
frame.
7. Check all parts to ensure they are secure before
operating the heater.
5
Kerosene Forced Air Heater User's Manual
190T-KFA
215T-KFA
190,000 / 55.7
215,000 / 63
1.42 / 5.38
1.63 / 6.17
13 / 49
13 / 49
8.5 / 0.59
9.0 / 0.62
120VAC / 60Hz
120VAC / 60Hz
2.7
2.8
Single
Single
Thermostat
Rear Handle
Lamp
Knob
Digital Temperature
Display
Drain Bolt
Fan Guard
Pressure
Gauge
Power
Cord
Fuel Tank
Publicidad
