MPM MBL-15M Manual De Instrucciones página 23

- whipping or kneading dough (danger of forming a ball of dough which may damage the appliance)
- juicing vegetables and fruit.
6. Every few seconds check the consistency of the mixed ingredients.
7. Do not exceed the maximum permitted working time of the appliance given in the user manual.
8. If the motor stops, immediately finish mixing or reduce the amount of ingredients in the jug.
9. To grind ice cubes add a small amount of water.
10. Do not remove the jug from the housing when the appliance is in use.
11. Do not insert any objects into the jug during mixing.
CLEANING AND MAINTENANCE
1. Blender components are corrosion-proof and easy to clean.
2. Each time before and after using, disassemble the appliance and wash its parts in warm water with
detergent, rinse and dry them thoroughly.
3. They should not be used in washing machines.
4. Periodically check all operating components of the appliance before using them. Do not use the
blender if the blades got stuck or rotate with difficulty. Turn them counter-clockwise to check if
they operate properly. Be careful no to get injured. The blades should rotate easily.
5. Do not use the appliance if the jug gets damaged, leaks or has fractures of cracks. Otherwise it
may crack while in use.
6. In order to clean the blender housing unplug the appliance and then wipe it with a damp cloth.
If water gets to the top of the appliance, it will go down and through the drain hole under the
housing.
7. The motor does not require any additional maintenance. Do not clean the appliance using harsh or
abrasive cleaning agents, materials or steel wool, which may cause damage.
NOTE! Do not immerse the blender body in water or any other liquids. Knives of the appliance
are sharp. Handle them carefully.
TECHNICAL DATA
Technical parameters are indicated on the product nameplate.
Maximum time of operation: KB Max = 3 min
Noise level: L
= 85 dB
WA
Length of power cord: 0.9 m
NOTE! MPM agd S.A. reserves its right to modify the technical data.
Proper disposal of the product (waste electrical and electronic equipment)
Marking on the product indicates that after the service-life of the product expires, it should not be dis-
posed with other type of municipal waste. Used equipment may have a negative impact on the environ-
ment and health of people due to potentially containing hazardous substances, mixtures and components.
Mixing electric waste with other types of waste or disassembling those in an unprofessional manner may
cause a release of substances that are hazardous to the environment and health. Used equipment should
be handed-over to a point for collection of electric waste. In order to obtain detailed information regarding the
electric waste collection points, the user should contact the municipal point of electric waste collection or used
equipment processing department.
EN
23