Earise T12 Manual De Instrucciones página 3

THE OPERATION PANEL
1. Mic in
2. Line in
3. Charging Indication
4. USB 5V Charging Port
5. Power OFF/ON
BLUETOOTH
Slide the power switch to the ON position, "Bluetooth mode, pairing" will be heard. Place the
speaker and Bluetooth device (phone or music device) no further than 10 meters apart. Activate
the Bluetooth function on your Bluetooth device. Once you have activated Bluetooth on your
device, select the pairing name "EARISE.T12" from the list of available Bluetooth devices.
AUX IN
1. There is a "LINE IN" jack on the speaker for the connection of non-bluetooth devices.
2. Connect the included AUX cable to the speaker and connect the other end to your device.
3. Select the music on your device and play.
Note: When AUX cable is connected to the T12, it will disconnect from your Bluetooth
device automatically.
MICROPHONE
You can plug the included microphone into the mic in jack on the rear of the speaker.
The microphone volume is fixed at an optimal level.
Note: If the microphone is placed too close to the speaker, you may hear loud
interference sound.
3