OPERATING INSTRUCTIONS.
1. The door of the room must be ajar without closing for greater efficiency.
2. Plug in the heater.
3. Switch on the heater with the On/Off Switch.
4.
Can turn on 2 heat levels, 750W or 1500W.
5. Turn on the oscillation switch if you want the heater to oscillate on both sides.
6. To switch off the stove, turn all the switches to OFF.
7. Unplug the power supply if you are not going to use it again.
NOTE.
- To change the internal bulb you can access from the back.
- Disconnect from electric current before changing it.
- The new bulb must be identical to the previous one, same voltage and same watts.
IMPORTANT SECURITY INSTRUCTIONS.
- Never leave the heater unattended while it is plugged in and switched on.
- While it is in operation, never cover it. It can cause fires.
- Always unplug the power when it is not in use.
- If you leave the heater for a moment do not leave it on, turn it off.
CLEANING AND MAINTENANCE.
- The heater must be unplugged from the electrical power and cool before proceeding
to its cleaning.
- Clean the device with a slightly moistened cloth.
- Never use abrasive or flammable products to clean the appliance.
- Never immerse the heater in water.
- Clean the grids with a duster, brush or vacuum cleaner.
- If you are not going to use your heater for a long period of time,
store it in a cool, dry place where it does not pick up dirt or dust.
SPECIFICATIONS.
- Input Power: 220V- 240V / 50 - 60 Hz.
- 2 Heating powers: 750W / 1500W.
- Swing function.
- Anti-tilt safety system.
- Protection against overheating.