XPower FT-68W Manual Del Usuario página 12

Cleaning the Atomization Assembly
When not in use, unscrew the misting nozzles, store the nozzles in a dry indoor place out
of reach of children. The nozzles must be dried completely before stored.
• Disassemble the nozzles (See illustration above) and unscrew the water faucet
adapter.
• For model FM-68W, FM-68W, FT-68W or FT-88W, disassemble the pumping hose.
• Soak the parts with soapy water or mild (or alkaline) detergent for several hours.
DO NOT use vinegar or other acidic detergent.
• Optionally, use the nozzle cleaner to clean the nozzle hole from the inner surface.
• When finished, dry the surfaces completely and reassemble the parts.
Replacing the Fuse
FUSE
Fuse Cover
• Grasp plug and remove from the receptacle or other outlet device. Do not unplug
by pulling on cord.
• Slide open the fuse cover on top of attachment plug. Remove the fuse carefully.
• To reduce risk of fire, replace fuse only with 5A/125V fuse.
Slide close the fuse cover on top of the attachment plug.
To reduce risk of fire. DO NOT replace the attached plug, which contains a safety
device (fuse), with any other plug. Discard product if the attachment plug is
damaged.
English - 12
FUSE
Fuse