Setting Up The Pc-300 - Roland PC-300 Manual Del Usuario

PC-300

Setting up the PC-300

The PC-300 is a MIDI controller. It contains no sound-generating circuitry of its own, but
it can effectively control external units (sound module, computer, etc.) by transmitting a
wide variety of MIDI messages.
To ensure maximum benefit from your system, be sure to read this manual and the manu-
als for the external equipment you are using.
Controlling other MIDI devices
1. Connect the PC-300's MIDI OUT port to the MIDI IN connector on the sound module
you wish to control.
MIDI OUT
connector
MIDI IN
connector
Sound module
2. Set the PC-300's KEYBOARD/PC switch to "KEYBOARD".
To MIDI IN of the
sound module
Desk Top Music setup
When connecting your computer with a sound module via a serial connection, use only a
serial cable which is designed for the model of computer you are using and its particular
kind of connector.
If the sound module has a COMPUTER/TO HOST switch, be sure to set it to the appropri-
ate position. This will vary depending on the type of computer, the way you are connecting
it, and the requirements of the software you are using.
8
PC-300
OUTPUT jacks
LINE IN,
AUX, or TAPE IN
Select "KEYBOARD"
Monitor speakers
(powered)
INPUT jacks
Stereo set, etc.