Publicidad
Idiomas disponibles
Idiomas disponibles
10 | English
U
Rated voltage
n
Impact rate
s
n
1
No-load speed (1 . gear)
0
n
2
No-load speed (2 . gear)
0
Maximum torque according to
M
ISO 5393
Brickwork
Metal
Wood
Ø
Max . drilling diameter
Ø
Max . screw diameter
Chuck clamping range
Weight according to EPTA-Pro-
cedure 01/2003
L
Sound power level
wA
L
Sound pressure level
pA
K
Uncertainty
a
Vibration total value
h
Delivery Scope
Cordless screwdriver .
Battery, application tools and other accessories shown
or described are not part of the standard delivery
scope . A complete overview of accessories can be
found in our accessories program .
Intended Use
The machine is intended for driving in and loosening
screws as well as for drilling in wood, metal, ceramics
and plastic .
Technical Data
The technical data of the machine are listed in the
table on page 59 .
Please observe the article number on the type plate
of your machine . The trade names of the individual
machines may vary .
Noise/Vibration Information
The measured values of the machine are listed in the
table on page 59 .
Noise and vibrational values (vector sum of three
directions) determined according to EN 60745 .
The vibration emission level given in this information
sheet has been measured in accordance with a stan-
dardised test given in EN 60745 and may be used to
compare one tool with another . It may be used for a
preliminary assessment of exposure .
The declared vibration emission level represents the
main applications of the tool . However if the tool is used
for different applications, with different accessories or
poorly maintained, the vibration emission may differ .
This may significantly increase the exposure level over
the total working period .
An estimation of the level of exposure to vibration
should also take into account the times when the tool
is switched off or when it is running but not actually
doing the job . This may significantly reduce the expo-
sure level over the total working period .
Identify additional safety measures to protect the ope-
rator from the effects of vibration such as: maintain the
tool and the accessories, keep hands warm, organise
work patterns .
Mounting and Operation
Action
Removing the battery
Inserting the battery
Mounting application tools
Reversing the rotational direction
Setting the torque
Selecting the drilling position
Gear selection, mechanical
Switching on and off
Selecting accessories
Maintenance and Cleaning
For safe and proper working, always keep the
machine and ventilation slots clean.
Clean the application tool, the tool holder, the power
tool's ventilations slots, and the battery's ventilation
slots each time after using .
After-sales Service and Customer
Assistance
Our after-sales service responds to your questions
concerning maintenance and repair of your product as
well as spare parts . Exploded views and information
on spare parts can also be found under:
www.spit.com
Our customer service representatives can answer
your questions concerning possible applications and
adjustment of products and accessories .
Figure Page
1
60
2
60
3
60
4
61
5
61
6
62
7
62
8
62
-
63
Publicidad
