Alpina DH800A Manual De Instrucciones página 7

CONNECTION AND SETUP
Please ensure the voltage supplied from your home matches to the
rating labels of the product.
Place the dehumidifier on a flat, stable surface. Insert the plug into a
household socket.
Switch the power to on. The dehumidifier will begin to operate and the
green LED indicator light will illuminate.
When the water tank is full, the LED will illuminate red. All operation
will automatically switch off until the water tank is emptied.
To remove the water tank, first switch the power to off on the
dehumidifier, disconnect from the mains, then carefully pull the tank
out and discard the collected water.
The water tank cover is removable for cleaning purposes- remove the
water tank from the dehumidifier, lift off the cover and wipe clean(do
not use any chemicals to clean the water tank).Replace the cover
before inserting the water tank back into the dehumidifier.
The back air vent cover is removable for cleaning purposes-remove
the back air vent cover from the dehumidifier and wipe clean (do not
use any chemicals to clean the water tank).Replace the cover before
using the dehumidifier.
REMOVABLE WATER TANK
When the water tank is full, the unit will automatically switched off and
the "Red" LED will come on.
To remove the water tank, first switch off the mini dehumidifier. Then,
remove the water tank from the unit and pour the water out to the
toilet or bathroom. Put the water tank back into the unit. To continue
dehumidifying, press the "Power switch" button again.
CLEANING
Before cleaning the unit, turn off the mini dehumidifier and unplug the
AC/DC power adapter. Use a soft cloth to clean the surface of the unit
and a soft bristled brush to remove dust from the air inlet and outlet
grills. Refer to cleaning the inside of the water tank overleaf.