Publicidad
Idiomas disponibles
Idiomas disponibles
Connections
Connecting Wireless Microphone(s):
u
Changing the Wireless Microphone's Battery:
Battery Precautions
The precautions below should be followed when using batteries in
this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the
batteries as indicated in the battery compartment. Reversed
batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline
and Carbon Zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time,
remove the batteries to prevent damage or injury from
possible battery leakage.
1
Press the
unit.
2
Press the
Mic to turn on the microphone. The
Mic indicator will blink and will remain
solid when connected.
NOTES:
• The wireless mics have a working distance
of up to 30 feet/10 meters in open space.
• If there is no audio input to the unit for 20
minutes, the wireless mic connection will
automatically turn off. To reactivate the
connection, turn on the unit and press the
button.
When the wireless mic batteries are low
the battery indicator will flash. Change the
batteries as follows:
1
Unscrew the bottom of the wireless
microphone.
2
Replace the batteries with 2 x "AA"
size/LR6 battery.
3
Screw the bottom of the wireless
microphone back on.
5. Do not try to recharge batteries not intended to be recharged,
they can overheat and rupture. (Follow battery manufacturer's
directions.)
6. Rechargeable batteries are to be removed from the product
before being charged.
7. Rechargeable batteries are only to be charged under adult
supervision.
8. Exhausted batteries are to be removed from the product.
9. Batteries shall not be exposed to excessive heat such as
sunshine, fire or the like.
— E7 —
/
button to turn on the
button on the Wireless
Publicidad
