Tools Required - BLUE SKY SSBB-3222 Manual Del Usuario

ASSEMBLY
TOOLS REQUIRED: Socket or wrench for tightening nuts
STEP 1
Unfold the hinged walls so that they
make a square.
STEP 2
Align the holes in the hinge with the
holes in the opposite wall.
Start at the first hole and insert one
bolt through from the exterior. Tighten
with a small nut.
Continue moving down the hinge,
inserting a bolt every third hole.
STEP 3
WARNING: Sharp edges! Use safety
gloves and glasses when bending the
slotted bottom panel.
Using a flat surface with an edge,
forcefully bend the center of the
slotted bottom panel to a 90° angle.
Then bend the two ends to a 90°
angle in the opposite direction.
Creating the bends in the bottom
panel will improve airflow through the
burn cage and make the contents burn
faster.
6 | www.bluesk youtdoorliving.com