Publicidad
Idiomas disponibles
Idiomas disponibles
NO
MIN
MEDIUM
All manuals and user guides at all-guides.com
USAGE
NOZZLE CLEANING if the water jet is irregular during the
operation or the thermic safety switch shuts off the machine, the
nozzle is likely to be blocked. Proceed as follows:
1) Turn the starting switch to the "OFF" position;
2) Remove plug from power socket;
WARNING
Keep spray head well clear of the face, other people,
animals or plants. Protective clothing and goggles must
be worn during use.
3) Remove the lance from the gun;
4) Clean the opening with the suitable instrument
(diameter < 0.04 in. = 1 mm.); Wire tool included.
5) Perform a visual check through the nozzle to see if all
obstructions are removed.
OK
The safety button on the handgun prevents
inadvertent starting on of the unit.
Detergent suction with 1 pint (0.6 l) tank. Fill the detergent
bottle. Attach the cap with the regulating knob to the bottle. Use
this knob to regulate the detergent flow from min. to max. Attach
detergent suction hose to cap. Use only detergents formulated
for pressure washers.
Attention: For suction to work. You must use the foam nozzle.
Remove lance and connect foam nozzle to extension.
MOVE THE PRESSURE REGULATION LEVER INTO THE MAX
POSITION
MAX
TURBO NOZZLE
Use turbo nozzle or adjust the jet nozzle to
increase the washing effect (the turbo lance is
not adjustable).
- 6 -
High pressure can cause serious injury.
For proper unit operation the pressure washer
must be used in the vertical position.
The output water pressure is adjustable and
it is controlled by the pressure regulation lever.
Turn the lever upward to decrease pressure
or downward to increase pressure.
The output pressure is indicated on the scale.
Publicidad
