SNOWJOE SUNJOE SB602E Manual Del Operador página 7

Fitting the Safety Guard
m
WARNING!
The safety guard must be properly installed.
The safety guard provides partial protection from the risk of
thrown objects to the operator and other bystanders.
1. Place the safety guard over the blade shaft and snap into
place (Fig. 3).
2. Now the diameter of the protection area is 11.5 in. (29.2 cm).
Fig. 3
3. If needed, you can flip up the steel edger guide + flower
guard onto the motor cover. This will allow you maximum
use of the SharperBlade
m
CAUTION!
Be careful when operating the machine
while steel flower guard is removed or raised.
Adjusting the Telescopic Shaft
1. Loosen the telescopic shaft adjustment knob (Fig. 4).
2. Pull and adjust the shaft to a comfortable height (Fig. 4).
3. Tighten the knob once the desired length is achieved
(Fig. 4).
Fig. 4
Twist the
knob counter-
clockwise to
loosen
Telescopic shaft
adjustment knob
Safety guard
.
™
Twist the knob
clockwise to
tighten
Application
Installing + Changing Blade
1. Disconnect the main plug.
2. Remove screw knob and the washer (Fig. 5).
Fig. 5
Screw knob
3. Assemble the SharperBlade
+ edger (Fig. 6).
Fig. 6
4. Place the washer on the SharperBlade
the screw knob (Fig. 7).
Fig. 7
Washer
7
to the electric grass trimmer
™
SharperBlade
and tighten with
™
Screw knob
SharperBlade
™
Washer
™