Absolute OF-S90 oilfree Manual Del Usuario página 15

Compressor must be connected to a power supply socket protected by a suitable
magneto-thermic switch.
The tabs show the absorption data for each type of compressor:
The compressor power supply cable or its eventual extensions must havean adeguate
wire section, proportioned to its lenght.
Thefollowing table shows the wires section data for each type of compressor in relation
to the lenght:
OF-S90
Tank filling time from 0 to 8 bar ( test temperature 20°C)
230V/50Hz
Check the compressor as follows:
1.Empty the compressor air tank
2.Close the compressor outlet on the tank and check that the drain cap is closed
3.Start the compressor and check the time elapsing between starting and automatic
switching off
4. Check that there are no leaks on connections.
5. Check max. pressure= 8 bar/116 Psi
All manuals and user guides at all-guides.com
I
WARNING!
Motor type
OF-S90
230 V
50 Hz
2 A
To 3 mt.
230 V 115 V
50 Hz 60 Hz
1 mm2 1,5 mm2
2 2
2.3 FILLING UP
OF-S90-4 OF-S90-15
38
2.4 CHECK OF FILLING TIME
115 V
60 Hz
4.9 A
from 3
to 20 mt.
230 V 115 V
50 Hz 60 Hz
1,5 mm2 2,5 mm2
2
OF-S90-25
180 240
GB
2
13