PRIXTON LUMIERE Manual Del Usuario página 24

Connect Audio Output:
Follow below picture to connect audio cable and device.
Press the button to turn off power of your projector before connection. Use audio cable to
connect follow below figure.
After connect and turn on both units. Your projector sound from externa! device now. After
using, turn off both unit
Station Amplifier:
lnstall USB Device And Micro Sd Card "TF":
Follow below picture to install USB and TF card Turn offthe unit before install USB/TF card.
Using TF Card And USB Playback (Media Player)
lnstall USB /TF device:
l. Turn off the unit before install USB / TF card.
2. lnstall the USB device into USB port.
3. After connect, press the
4. Press the SOURCE button to enter and use@buttons to
search the MEDIAPLAYER mode.
5. After selection, use buttons
necessary, use the button to select TF card or USB and press the press the
6. Use buttons to search the correct file and press the
button of unit or button of remote to start playback.
7. Press button to fast search forward and rewind.
8. Press button to search next or previous file.
9. During playback, press the
the button to turn off power FIRST.
button to turn on unit and the power indicator ligh GREEN.
to search the MUSIC / PHOTO // MOVIE icon and press the
button to pause and press again to resume. NOTE: Remove USB / TF device, press
24
button to enter.
button to preview playback file and press the
button to enter, lf