Canceling The Display Demonstration; Setting The Clock - JVC KD-AR7500 Manual De Instrucciones

Canceling the display
demonstration
If no operations are done for about 45 seconds,
display demonstration starts.
[Initial: Demo]—see page 32.
1
Enter the PSM menu (see page 5).
2
Select "Off."
• Make sure "Demo/Link" is shown on the
display. If not, press 5 or ∞.
3
Finish the procedure.
To activate the display demonstration
In step 2 above, select "Demo" or
"ImageLink." For more details, see page 32.

Setting the clock

1
Enter the PSM menu (see page 5).
2
Set the hour, minute, and clock
system.
1 Select "Clock Hr" (hour), then
adjust the hour.
2 Select "Clock Min" (minute), then
adjust the minute.
3 Select "24H/12H," then select
"24H" or "12H."
3
Finish the procedure.
9