Jimmy HW9 Pro Manual De Instrucciones página 7

Operation of machine
1.In the upright tilt state, press the on/off button, default
is in Auto mode, press the mode button to switch among
floor mode, carpet mode and Auto mode, accompanied
by English voice reminding. Press the on/off button
again, the voice reminds "Machine turning off", the main
motor will run for 2 seconds, the machine stops working.
When the battery level is lower than 20%, the machine
switches to the floor mode automatically. (Fig 9)
2 . I n A u t o m o d e , t h e m a c h i n e p o w e r c h a n g e s
automatically basing on how much dirty water or dust
is detected. And LED light colour changes accordingly.
The more dirty water or dust is detected, the more red
lights. And the less dirty water or dust is detected, the
more blue lights.
Notes:
1.When cleaning carpet, please clean the floorhead
first (Refer to "Floorhead cleaning") and replace with
the carpet brushroll (Refer to "Brushroll window and
brushroll assembly and disassembly").
2.When cleaning the floor ,make sure the brushroll
window flip cover is slid up.(Fig 10)
3.When cleaning the carpet, make sure the brushroll
window flip cover is slid down.(Fig 10)
4.When using the machie, the brushroll rotates normally.
The machine will stop running if it is placed upright, the
display screen will keep the original use state, press the
on/off button within 30 seconds to shut down the screen, if there is no operation, The main motor will stop and
power off after running for 2 seconds, the display screen turn off.
5.After the machine finishes using, put it vertically on the charging base to ensure sufficient power for next
usage.
Water spray function
When the machine is working, press the water spray button, the spray mouth sprays fan-shaped water
continuously; release the water spray button to stop spraying water. Press the water spray button twice
continuously within one second, the spray mouth sprays fan-shaped water for 3 seconds.(Fig 11)
Notes:
1.The spray button cannot be used together with the on/off button or mode button.
2.Please use the JIMMY cleaning solution we provide to clean the product. Do not put high foam solution
into the cleaning tank,otherwise too much foam will be generated during using, which may penetrate into the
machine and cause danger.
Machine charging
Connect the charge to the power supply and charging base, put the product into the charging base to start
charging.The display screen will turn off when fully charged.
Notes:
1.If the product is long idled , after purchase, please use the adapter supplied with the product to charge the
battery within every 3 months.
2.Do not leave the charger on power socket all the time to prevent children from touching it by mistake.
3.Keep the charger plug and your hands dry before inserting the charger into the charging stand.
4.Before the first use, please fully charge the battery pack, and before the second charge, please empty the
battery to ensure the life of the battery pack.
5
9
Floor cleaning
10
slide up the window
11
Carpet cleaning
slide down the window
5