ebi Tinago Guía De Usuario página 4

Download the APP and log in
1. Scan the QR code or
search for 'Smart Life'
in the Apple store or
Google store to download
the APP.
2. Sign up or log in with
your account.
Connect the feeder with the APP
iOS instructions
1. Turn on the WIFI and Bluetooth on your smartphone or tablet. In case it is already on, proceed to
step 2.
2. Open the APP "Smart Life" and make an account or log in with your existing account.
3. Reset the WIFI on the feeder by pressing and holding the "WIFI reset button" for 3-5 seconds until
the light starts blinking.
4. A notice will pop up for "Devices to be added: 1".
5. Tap the "add" option to add the device.
6. Type in the WIFI name and password. (Make sure only 2.4Ghz Network is selected).
7. Wait for the device to be connected, then tap option "Done" to enter the controlling interface.
Android instructions
1. Turn on the WIFI and Bluetooth on your smartphone or tablet. In case it is already on, proceed to
step 2.
2. Open the APP "Smart Life" and make an account or log in with your existing account.
3. Reset the WIFI on the feeder by pressing and holding the "WIFI reset button" for 3-5 seconds until
the light starts blinking.
4. Click on "Add device" in the home screen of the APP.
5. In case "Turn on bluetooth" pops up in the upper half of the screen, select it. Even if your bluetooth
is already on from the main Android Menu. A dialog will pop-up explaining the next step. In case
"Smart pet feeder" is shown there, continue to step 9.
6. Select "Go to settings" where it says Allow "Nearby devices" Permission as this option is disabled
for the Smart Life APP on your phone.
7. In the next screen, select "Permissions", the APP-permissions screen will open.
8. In the "APP-permissions" screen, select "Nearby devices" and allow this service for the APP. Now
hit the back arrow three times to go back to the "Add device screen".
9. At the top of the "Add device screen, you should now see "Discovering devices" with a small
image of the pet feeder and an "Add" button. Press this button.10. In the next screen you will see
"Smart pet feeder - Tap to add this device". Tap it.
11. Type in the WIFI name and password. (Make sure only 2.4Ghz Network is selected).
12 Wait for the device to be connected. You will hear a short beep from the device. Then tap option
"Continue/Done" to enter the controlling interface.
6
EN
Tip: Due to the upgrade and updates of
the APP. The operation in the APP will
be slightly different. Please follow up the
instructions in the APP to complete the
binding process.
www.ebi.eu
Set a meal plan
You can continuously set a daily feeding schedule for your pet.
Note:
As the APP device consume power super fast, we do not suggest
to take the battery as the only power supply, as it will only last
for about 10 hours.
www.ebi.eu
7
EN