Celexon Leinwand V2.0 Motor Professional Plus Manual De Instrucciones página 21

STEP 1: SECURITY CHECK
The screen is approx. 1/3 charged on delivery. Insert the plug into the socket
(ensure correct voltage and plug type). The cable must not be laid on hot
surfaces or stretched. When using an extension lead, make sure it has the
correct specifi cation. Fully charge the screen before using it for the fi rst time
(takes approx. 2.5 hours) and insert the battery into the remote control. Switch
the ON/OFF button on the housing to ON.
STEP 2: EXTEND THE SCREEN (FIG. 2)
Press the „Down" button on the remote
control or on the housing. The screen
extends and stops automatically at
the set end point. Make sure that no
objects or persons obstruct the
extension of the screen.
STEP 3: RETRACT THE SCREEN (FIG. 3)
Press the „Up" button on the remote
control or on the housing. The screen
retracts and stops automatically at the
housing or the set upper end point.
Make sure that no objects or persons
obstruct the retraction of the screen.
STEP 4: STOP THE SCREEN
To stop the projection screen manually, press the stop button on the remote
control or on the housing.
It is possible to set the stop points. Please request the instructions for this procedure from
your specialist dealer or directly via www.celexon.com
9