HOME DECÓ 51376 Manual De Instrucciones página 6

connected with another Bluetooth device. Turn off the Bluetooth connection of the paired
device and then connect the Bluetooth on your desired device to use it with the speaker.
BLUETOOTH INDICATOR
The Bluetooth indicator light will flash rapidly when in pairing state. If the light stops
flashing, the Bluetooth is connected and the speaker will play.
BLUETOOTH MUSIC MODE
Short press "V+" to play the next song and long press to volume up.
Short press "V-" to play the previous song and long press to volume down.
Press >II to play or pause music.
AUX IN AUDIO INPUT MODE
By inserting the 3.5mm aux in cable, the speaker can act as external audio device when
connected to a mobile phone, PC, tablet or Mp3 player.
Press "V+" to volume up, "V-" to volume down.
In Bluetooth mode, when the 3.5mm audio cable is plugged in the lamp, the speaker will
automatically switch to the line in mode.
Note: The device will be always in bluetooth mode when the lamp is first turned on, even
if the 3.5mm audio cable is plugged in. You need to pull out the 3.5mm cable from the
lamp and plug in again to activate the line in mode.
FREQUENCY ASKED QUESTIONS
Unsuccessful pairing and connection repeatedly
1. Check the speaker and make sure it is in the searching state or reboot the speaker.
2. Connection is difficult when there are too many bluetooth devices nearby. Turn off other
Bluetooth devices.
3. Turn off the bluetooth device that was connected with the bluetooth speaker the last
time, and reconnect the speaker.
Muted or distorted sound
Check the volume of your device or the speaker, and adjust the volume.
Choppy music play
1. Check if the device is beyond the effective connection distance.