Publicidad
Idiomas disponibles
Idiomas disponibles
1. Front grille
4. Fan blade
7. Height adjustment knob
10. Motor housing
13. Tilt adjustment screw
16. Extension pipe
HOW TO ASSEMBLE
1. Unscrew the plastic nut from the column, put the column into the base and tighten
the plastic nut. Extend the extension pipe fully by loosening the height adjustment knob.
2. Put the on/off box into the pipe and tighten the thumb screw.
3. Unscrew the blade cap and the plastic nut on the motor shaft.
4. Set the back grill in the proper position with the handle up.
5. Screw the back grill on the motor.
6. Install the blade onto the shaft until it reaches the retaining pin.
7. Screw the blade cap onto the motor shaft to tighten the blade.
2. Plastic rim
5. Screw
8. Motor shaft
11. On/off box
14. Thumbscrew
17. Stand
3. Blade cap
6. Back grille
9. Oscillating button
12. Speed knob
15. Power cord
18. Plastic nut
Publicidad
