Valve Trim Installation
3
(See page 6 & 7 for Siderna
C.
1
3
Secure the escutcheon (1) to the bracket (2) with
the 2 screws provided (3). Do not overtighten
escutcheon screws.
valve trim installation.)
®
D.
2
5
Slide trim ring (1) over the cartridge and sleeve
and into the escutcheon. Install volume control
handle base (2) with lever to the right as shown
(3). Install set screw (4) or (5) followed by the
handle lever (6) or (7).
For RSVP
E.
Rook
6 o'clock position. Install set screw (8) into handle
(9). Push handle onto valve cartridge and tighten
set screw to secure handle.
5
60 Series Installation
3
2
1
4
6
7
, Sotria
, Charlotte
®
™
models, lever should point downward to
™
E.
9
8
, Virage
&
®
®
100714 Rev. A