Publicidad
Idiomas disponibles
Idiomas disponibles
2.
Detach the filter cover and remove the debris from the compartment. It is
recommended to clean the filter cover with splashing water. If brushing is deemed
necessary, use only a soft brush to clean it carefully and gently to avoid any damage.
3.
Align and return the filter cover to the base after cleaning. Make sure the middle
panel's side wall is aligned as shown in the image below.
4.
Make sure that filter cover is in place and the top cover is correctly installed and
secured by the side clips before next operation.
CAUTION!
- Replace a damaged filter cover immediately with a new one before the next operation.
- Replace a damaged flap immediately with a new one before the next operation.
MAINTENANCE & STORAGE
NOTE:
1. Be sure to clean and dry the areas around the charging port and water sensors after
every use to avoid the forming of stains (byproduct of a natural chemical reaction
between electric current and water). Otherwise, the stains can be removed by light
scrubbing with a cotton bud soaked with juice of lemon or vinegar.
11/195
Publicidad
