Publicidad
Idiomas disponibles
Idiomas disponibles
Instruction manual
WT2400 - QUARTZ WALL CLOCK
To start the clock
Insert 1 x Mignon AA LR06 battery into the battery compartment (with set knob)
and make sure the battery polarity (+/-) is as indicated.
To set the time
Turn the hand set knob in rear of movement clockwise or counter clockwise until
the desired time is obtained on the dial.
Precautions
This main unit is intended to be used only indoors.
Do not subject the unit to excessive force or shock.
Do not expose the unit to extreme temperatures, direct sunlight, dust or
humidity.
Do not immerse in water.
Avoid contact with any corrosive materials.
Do not dispose this unit in a fire as it may explode.
Do not open the inner back case or tamper with any components of this unit.
Batteries safety warnings
Use only alkaline batteries, not rechargeable batteries.
Install batteries correctly by matching the polarities (+/-).
Always replace a complete set of batteries.
Never mix used and new batteries.
Remove exhausted batteries immediately.
Remove batteries when not in use.
Do not recharge and do not dispose of batteries in fire as the batteries may
explode.
Ensure batteries are stored away from metal objects as contact may cause a
short circuit.
Avoid exposing batteries to extreme temperature or humidity or direct
sunlight.
Keep all batteries out of reach from children. They are a choking hazard.
Use the product only for its intended purpose!
EN1
Publicidad
