Manta RDI916 SOLAR Manual De Instrucciones página 11

EN – RDI916 SOLAR
POWER OPERATION
BATTERY OPERATION
To use the device on battery power, disconnect the power cord from the device and the wall
socket.
Open the battery compartment on the back of the device in accordance and insert the LR-20
batteries.
ATTENTION: It is important to respect the indicated battery polarity. Check the batteries
regularly. Replace old or discharged batteries. If you will not be using the device for a long
time, remove the batteries to prevent damage to the device due to electrolyte leakage.
AC OPERATION
Connect one end of the included AC power cord to the AC IN socket on the back of the unit
and the other end to electric socket onto wall. To completely disconnect radio from the mains
supply, disconnect the mains plug.
NOTE: Please check carefully that the voltage indicated on the radio corresponds to your
household voltage.
RECHARGEABLE BATTERY
Insert the Micro SD cable plug into the DC 5V socket into radio. Plug the other end of the
USB cable into a suitable charger. Into radio will glow red while charging.
Charging time should not exceed 8 hours.
11