BTI PROGILINE H 82 Manual Original página 32

Beveling Edges (see figure H)
The V-grooves in the front planer base plate allow
quick and easy beveling of workpiece edges. Depend-
ing on required bevel width, use the corresponding V-
groove. For this, place the planer with the V-groove
onto the edge of the workpiece and guide it along the
edge.
Groove to be
used
none
small
medium
large
Planing with Parallel/Beveling Guide
(see figures D–F)
Mount the parallel guide 21 or beveling guide 24 to
the machine using the corresponding fastening bolt
23. Depending on the application, mount the rebating
depth stop 27 with fastening bolt 26 to the machine.
Loosen locking nut 22 and adjust the desired rebating
width. Retighten locking nut 22.
Adjust the requested rebating depth accordingly with
the rebating depth stop 27.
Carry out the planing procedure several times until the
requested rebating depth is reached. Guide the
planer applying sideward supporting pressure.
Beveling with the Beveling Guide
Storage Compartment for Planer Blade/Allen
Key
A planer blade 16 and an Allen key 18 can be housed
in the storage compartment 3 as shown in the figure.
To remove the contents in the compartment, com-
pletely pull the storage compartment for the planer
blade/Allen key 3 out of the planer.
3
32 | English
Dimension a
(mm)
0 – 5.7
1.9 – 7.6
4.7 – 10.3
5.9 – 11.6
When beveling rebates
and surfaces, adjust the
required slope angle with
the angle adjustment 25.
18 16
Maintenance and Service
Maintenance and Cleaning
Before any work on the machine itself, pull
the mains plug.
For safe and proper working, always keep
the machine and ventilation slots clean.
Ensure easy operation of the park rest 28 and clean it
regularly.
If the machine should fail despite the care taken in
manufacturing and testing procedures, repair should
be carried out by an after-sales service centre for BTI
power tools.
In all correspondence and spare parts orders, please
always include the 6-digit order number given on the
nameplate of the machine.
Disposal
The machine, accessories and packaging should be
sorted for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools into
household waste!
According the European Guideline
2002/96/EC for Waste Electrical and
Electronic Equipment and its imple-
mentation into national right, power
tools that are no longer usable must be collected sep-
arately and disposed of in an environmentally correct
manner.
Subject to change without notice.
2 609 932 750 • 12.1.10