BTI EX 125-150 LV Manual Original página 28

Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-4.
Typically the A-weighted noise levels of the product
are: Sound pressure level 82 dB(A); Sound power
level 93 dB(A). Uncertainty K =1.5 dB.
Wear hearing protection!
The vibration level given in this information sheet
has been measured in accordance with a standard-
ised test given in EN 60745 and may be used to
compare one tool with another. It may be used for
a preliminary assessment of exposure.
Vibration total values a
Application
Measurement according to EN 60745 for sanders (using sanding sheet with grain size 180):
Sanding with maximum removal rate
Intermediate varnish sanding
Fine sanding softwood
Fine sanding hardwood
Fine sanding veneer
Sanding old paint and varnish
Sanding metal
Sanding filler
Sanding wood and veneer edges
Intermediate varnish sanding on edges
Sanding thermoplastics
Measurement according to EN 60745 for polishers (using lambskin polishing bonnet):
Polishing
Declaration of Conformity
We declare under our sole responsibility that the
product described under "Technical Data" is in
conformity with all relevant provisions of the direc-
tives 2011/65/EU, until 19 April 2016:
2004/108/EC, from 20 April 2016 on:
2014/30/EU, 2006/42/EC including their amend-
ments and complies with the following standards:
EN 60745-1, EN 60745-2-4, EN 50581.
Technical file (2006/42/EC) at:
BTI Befestigungstechnik GmbH & Co. KG
Salzstraße 51, 74653 Ingelfingen, GERMANY
28 | English
(triax vector sum) and uncertainty K determined according to EN 60745-2-4:
h
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with different
accessories or insertion tools or is poorly main-
tained, the vibration emission may differ. This may
significantly increase the exposure level over the
total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the
tool is switched off or when it is running but not ac-
tually doing the job. This may significantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
Oscillation Application
Rate Force
6
5–6 10–20
5–6 0–10
5–6 10–20
5–6 10–20
5–6 30–40
5–6 30–40
5–6 20–30
3–4 0–10
3–4 0–10
1–2 0–10
1 0–10
ppa. Stephan Uder
Head of Procurement
Department
BTI Befestigungstechnik GmbH & Co. KG,
Salzstraße 51, 74653 Ingelfingen, GERMANY
Ingelfingen, 15.11.2015
a
h
2
[m/s ] [m/s
[N]
50 2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
5.5
5.5
7.5
3.5
ppa. Christian Hasenest
Head of Business Unit
Construction
1 609 92A 1SG • 11.11.15
K
2
]
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2.5