Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
NOTE:
•
When you connect a 3.5 mm plug to the AUX IN port, a melody will play and
the speaker will then automatically enter AUX IN mode.
•
You can adjust the volume on the speaker. For all other playback options, use
the external device's controls.
•
When the AUX IN cable is connected, you cannot select Bluetooth mode by
pressing the
SD card and USB stick
•
Press and hold the
•
Insert a micro SD card into the micro SD card slot until it clicks into place or insert the
USB stick into the USB port.
NOTE:
•
When you connect a micro SD card or USB stick, a melody will play and the
speaker will then automatically enter SD card or USB mode.
•
For best playback, make sure only compatible audio files (MP3, WAV or WMA)
are stored on the micro SD card or USB stick.
•
To remove the micro SD card, simply press the card further into the slot and then release
it. The card will pop out of the slot.
•
To remove the USB stick, simply pull it out of the USB port.
Pairing with a Bluetooth device
To connect this speaker to a Bluetooth device, you must first pair the speaker with the device.
1.
Switch on the Bluetooth device (such as your phone or tablet):
• Go to settings on your device.
• Select Bluetooth and turn it on.
NOTE: Before attempting to connect the device to the speaker, check and remove
any connections such as the AUX IN cable or micro SD card. Moreover, if your
Bluetooth device was previously connected to another device, remove that
connection.
2.
Press and hold the
will enter the Bluetooth mode (default mode). (If the speaker is already on, press the
button to enter Bluetooth mode directly.) The speaker will automatically start searching
for a new or existing Bluetooth device. While the speaker is searching for the Bluetooth
device, the Bluetooth indicator light will flash blue quickly.
3.
When the Bluetooth device displays the speaker's Bluetooth name, EDENWOOD TUB1,
select the name and confirm the connection. A melody will play, and the Bluetooth indicator
light will blink slowly to confirm the devices have successfully paired.
4.
Only one external device can be connected to the speaker at a time. Press and hold the
button to disconnect the Bluetooth connection and initiate pairing for a new external
device. A melody will play to confirm the disconnection. You can also disconnect the
Bluetooth connection on the external device.
button.
button to turn on the speaker.
button to turn on the speaker. A melody will play, and the speaker
23
EN
Publicidad
