Bosch GSR Professional 6-45 TE Manual Original página 13

OBJ_BUCH-137-002.book Page 13 Wednesday, November 7, 2007 3:04 PM
Technical Data
Screwdriver
Article number
Rated power input
Output power
No-load speed
Rated speed
Tool holder
Max. screw dia.
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may
vary.
Assembly
Changing the Tool (see figure A)
Pull off the screwing-depth stop 4 toward the
front. Pull out the screwdriver bit 1. If required,
the universal bit holder 9 can also be pulled off
and replaced.
After changing the tool, reattach the screwing-
depth stop 4.
Operation
Starting Operation
Observe correct mains voltage! The voltage
of the power source must agree with the
voltage specified on the nameplate of the
machine. Power tools marked with 230 V can
also be operated with 220 V.
Bosch Power Tools
GSR 6-25 TE
Professional
3 601 D41 3..
W 701
W 327
0 – 2500
rpm
rpm 0 – 1700
¼" hexagon socket ¼" hexagon socket
mm 6
kg 1.5
/ II
Reversing the Rotational Direction
The rotational direction switch 8 is used to
reverse the rotational direction of the machine.
However, this is not possible with the On/Off
switch 7 actuated.
Right rotation: For driving in screws, push the
rotational direction switch 8 left to the stop.
Left rotation: Push the rotational direction
switch 8 right to the stop (for unscrewing
screws).
Switching On and Off
To start the machine, press the On/Off switch 7
and keep it depressed.
To lock the pressed On/Off switch 7, press the
lock-on button 6.
To switch off the machine, release the On/Off
switch 7 or when it is locked with the lock-on but-
ton 6, briefly press the On/Off switch 7 and then
release it.
English | 13
GSR 6-45 TE
Professional
3 601 D40 3..
701
327
0 – 4500
0 – 3000
6
1.4
/ II
1 609 929 M77 | (7.11.07)