Descargar Imprimir esta página

Domo DO983RTKZ Manual De Instrucciones página 32

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 34
BULB REPLACEMENT
1.
Set the temperature to '0'. Unplug the appliance from the power supply before replacing
the light bulb.
2.
Remove the bulb cover.
3.
Unscrew the old bulb and then screw a new bulb.
4.
Replace the bulb cover. Now close the appliance.
VACATION TIME
For short vacation periods, leave the control knobs at their usual settings. During longer
absences;
1.
Remove all foods.
2.
Disconnect from electrical outlet.
3.
Clean the refrigerator thoroughly, including defrost pan.
4.
Leave door open to avoid possible formations of condensate, mold or odors.
POWER FAILURE
· Most power failures are corrected within an hour or two and will not affect your
refrigerator temperatures. However, you should minimize the number of door openings
while the power is off.
· During power failures of longer duration, take steps to protect your food by blacking dry
ice on top of packages.
TROUBLE SHOOTING
Problem
The appliance doesn't
work.
The food is too warm.
32
DO983RTKZ
Possible causes
· The temperature control is
set to '0'.
· The plug is not fully in the
wall outlet.
· The fuse is blown.
· The wall socket is faulty.
· The temperature is not set
correctly.
· The door has been open a
long time.
· Someone put hot food in the
appliance.
· The unit is close to a heat
source for a short while.
Solution
· Set the temperature control
to a number above '0' to
start the appliance.
· Put the plug in the mains.
· Check the fuses.
· Contact an electrician.
· Set the temperature again.
· Do not open the door longer
than needed.
· Set the temperature lower.
· See the chapter on first use.

Publicidad

loading