Braun 8365CC Manual página 10

Charging
• Connect the shaver to an electrical outlet by snapping the power supply (10) into the
power socket of the shaver (9) or the charging stand (10a). For cc models plug into
the station power socket (see chapter «Clean & Charge Station»).
• For first-time charge, charge continuously for at least 1 hour.
• The actual charge status is shown on the display.
Display
• The display information is dependent on the model.
• Some models only show icons during charging or operation. On other models a series
of icons is also shown after the shaver has been turned off.
• The table below shows the icons that can appear on the shaver display.
Battery status
Plug reminder (low charge / cordless operation only)
Travel lock
Replacement indicator for Foil & Cutter cassette
The battery status is shown with segments and additionally
in digits (for some models also with a battery icon).
• The status segments appear / disappear gradually with the
status of the battery power.
• The digital number shows the remaining shaving time in
minutes.
1. Flashing: Battery is in low charge, i.e. 5 minutes shaving
time are left.
2. Fast flashing: This appliance can only be operated
cordless. Disconnect the shaver from the power supply
before turning it on.
When the travel lock icon appears on the display, the shaver is
locked.
The replacement indicator shows the usage of the
Foil & Cutter cassette. The status segments disappear
gradually with the numbers of shaves.
9