Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
Problem
The clipper has become blunt.
Clipper stopped functioning.
The clipper cannot be charged.
Clipper can be used for only
about 10 minutes even after
charging.
Makes a loud sound.
If the problems still cannot be solved, contact the store where you
purchased the unit or a service center authorised by Panasonic for repair.
Action
Charge the clipper.
(See page 9.)
Clean the blade and apply oil.
(See page 12.)
Replace the blade.
(See page 11.)
Charge the clipper.
Or use with the AC operation.
(See page 9.)
Push the main body into the
charging stand or appliance
plug all the way.
Charge within the
recommended charging
temperature of 10 °C (50 °F) to
35 °C (95 °F).
Have the battery replaced by an
authorized service center.
Confirm that the blade is
properly attached.
Frequently asked questions
Question
Will the battery deteriorate
if not used for an extended
period of time?
Can the battery be charged
before every use?
Removing the built-in rechargeable battery
ATTENTION:
A lithium ion battery that is recyclable powers the product you
have purchased. Please call 1‑800‑8‑BATTERY for information
on how to recycle this battery.
Remove the built-in rechargeable battery before disposing the
clipper.
This figure must only be used when disposing the clipper, and
must not be used to repair it. If you dismantle the clipper yourself,
it may cause malfunction.
• Remove the clipper from the AC adaptor.
• Press the power switch to turn on the power and then keep the
power on until the battery is completely discharged.
Answer
The battery will deteriorate if not
used for over 6 months, so make
sure to perform a full charge at
least once every 6 months.
The clipper uses a lithium ion
battery, with the charging
current controlled, so there is no
problem with battery life.
13
Publicidad
