Dometic ACC3100D Instrucciones De Uso página 8

EN
8.3 Selecting the mode
The AUTO mode is selected at turn on.
1.
Press the button.
• The indicator lights up.
• The TURBO mode is activated.
2. Press the
button.
• The indicator lights up.
• The SLEEP mode is activated.
3. Press the
button.
• The indicator lights up.
• The AUTO mode is activated.
4. Press the
button.
The mode selection is repeated from the beginning (see step 1).
Selecting the STORAGE mode
CAUTION! Health hazard
Connect the vehicle or the ventilation system to the mains to prevent the ventilation system from discharg-
ing the battery.
Press the button for 3 s to activate the storage mode.
The displayed symbols flashes once and then disappears, excluding the
The indicator lights up.
Press the button for 3 s to deactivate the storage mode.
The symbols that were displayed before the STORAGE mode was activated are displayed in sequence on the dis-
play.
8.4 Adjusting the light (optional)
The LED light strips can be dimmed in 3 different levels.
Press the button to adjust the brightness.
Each press of the
lection is repeated from the beginning.
8.5 Using the Dometic Climate App
The Dometic Climate App can be used to control the ventilation system via the mobile phone or to update the
soware of the ventilation system.
Note Depending on the screen in the Dometic Climate App, a < button is displayed, which allows to
switch to the previously displayed screen.
8
button increases the brightness. After level 3, the LED light strips turn off and the level se-
button.