Publicidad
Idiomas disponibles
Idiomas disponibles
Problem
The remote control
does not work
Poor sound or no
sound
Poor picture or no
picture
Poor TV reception
Poor Cable / Satellite
TV Reception
TV shuts off
Black and white
image from the
connected AV device
Solution/Issue
Make sure the remote control is in range with no obstructions.
Check the batteries.
Correct operating mode set: TV, VCR etc.
Station or Cable TV experiencing problems, tune to another station.
Check sound adjustments (Volume or Mute).
Check for sources of possible interference.
Station or Cable TV experiencing problems, tune to another station.
Make sure channels are set into memory.
Check antenna or Cable TV connections, adjust antenna.
Check for sources of possible interference.
Check picture control adjustments.
Ensure the antenna amplifier is turned on for Antenna TV.
Adjust the antenna position to a stronger signal receiving angle.
Check if the Antenna connection is tight.
Check if there is power supplied to the Antenna distribution box.
Check if your incoming cable is connected to the correct cable / antenna wall
connection.
Ensure antenna amp is turned off for cable signal.
Check if incoming cable is connected correctly.
Ensure cable splitter box has power.
Check if the incoming cable is connected to the correct cable / Satellite wall
connection.
Ensure Dish has no obstruction.
Sleep Timer is set.
Power interrupted.
Check video connections on both the TV and connected AV device. Ensure
all video cables are connected firmly.
- 24 -
CCD-0007276 Rev: 07-24-23
Publicidad
