hanging cupboard, tighten the hood with
enclosed 4 screws.
NOTE: The extensible pipe is an optional
accessory not supplied.
Make sure you remove all the protection film
before installation.
There are two ventilation methods, vertical and
horizontal:
Vertical ventilation:
The air will be vented from the top of the hood,
you have to install also the one-way valve.
Horizontal ventilation:
You can put the round cover in the upper outlet
and remove the rear lid to vent from the back.
Air ventilation setting
Outdoor exhausting:
Turn the adjuster to outdoor position, install the
outlet, turn on the cooker hood, then the air will
be vented from the outside outlet.
Recirculation:
The recirculation mode needs the carbon filter
(accessory not supplied). You have to turn the
adjuster to indoor position, install the outlet cover
and then the air can be vented from the inside
outlet.
The charcoal filter is mounted on the lower part
of the motor housing and it must be changed
once every three months or after 120 hours of
use, it shouldn't be exposed to heat. It cannot be
washed or recycled.
To install the carbon filter follow the
instructions below:
Make sure the filter is securely locked.