Qilive Q.5675 Manual De Instrucciones página 5

2. DESCRIPTION
6
1. Lever(Extra lift function)
2. Defrost button
3. Reheat button
3. INSTALLING
Place the crumb tray inside the toaster. Position the appliance on a flat and stable surface close
to a power outlet.
Ensure there is no object, fabric or curtain close to the toaster to prevent a fire hazard.
4. USING THE APPLIANCE
Standard use
1. Connect the power cord to a wall outlet.
2. Place up to two slices of bread, flatbreads or bagels in the toaster slots.
3. Using the thermostat, select the browning level desired. For a first time use, it is
recommended to set the thermostat to a medium level. After this, you will be able to adapt the
toasting level based on your personal preferences.
4. Push the lever downwards until you hear a click; this indicates the bread is in the correct
position. Browning of bread will start automatically. Note: if the toaster is not connected to the
mains, the lever will not click into position.
NB : Note that if you put only one slice of bread in the toaster, it will be more toasted than if you
put one in each slot.
If you use your toaster on a continuous basis, note that, while maintaining the same settings, the
first slices of bread will be slightly less toasted than the next slices.
5. The toaster will automatically turn off when the desired browning is achieved; the bread will
then pop back up. Toasting can be stopped at any moment by pressing the cancel button
Toasting frozen bread
To toast frozen bread, first place the frozen bread in the slots and choose the desired browning
level. Push the lever downwards until it clicks in, then press the defrost button:
Reheating toasted bread
The toaster allows you to reheat bread that has already been toasted without further browning. To
reheat, place the bread in the slots, lower the lever until it clicks in, and press the reheat button:
4. Cancel button
5. Thermostat
6. Removable crumb tray
5
1
2
3
4
5
EN
.