Página 2
WARNING: Electrical option cabinet must be wired to a Class A 20 Amp GFCI (Ground Fault Circuit Interrupter) protected circuit when used in bathrooms and all other locations required by the National Electric Code. SAVE THESE INSTRUCTIONS TOOLS NEEDED ACCESSORIES Scan the available QR codes to learn more about these accessories at Robern.com [P2ELECTRIC*] [QUICKCADDY*] [DLB-20] Portray Electric Upgrade...
Página 11
4. Press the shelf hole plugs [SS143] into the unused holes inside the cabinet. Place the screw head caps [SS672] over any exposed screw heads. 5. Install a Robern logo coverplate [211-1329] into each unused electrical access hole. 6. Insert clear shelf clips [221-1376 and 211-1377] into the holes in the back channel on the sides of the cabinet.
Página 12
ROBERN in writing within one (1) year from the date of delivery. ROBERN is not responsible for installation costs. The warranty is void in the event the product is damaged in transit, or if damage or failure is caused by abuse, misuse, abnormal usage, faulty installation, damage in an accident, improper maintenance, or any repairs other than those authorized by ROBERN.
Página 23
[SS672] sur les têtes de vis exposées. para el cabezal del tornillo [SS672] sobre cualquier cabezal que esté expuesto. 5. Installez la plaque du logo Robern [211-1329] dans le trou d'accès électrique inutilisé. 5. Instale la placa con el logotipo de Robern [211-1329] sobre el orificio de acceso eléctrico que no se vaya a utilizar.
Página 24
écrit dans un délai d'un (1) an à compter de la date de livraison. ello a ROBERN por escrito en un plazo de un (1) año a partir de la ROBERN n’est pas responsable des frais d’installation. La garantie fecha de entrega del producto adquirido.