Connection; Accessories; Wall 4V (Included) - Work Pro W UDA SERIE Manual De Usuario

UDA SERIES: UDA 1, UDA 2, UDA 4
USER MANUAL / MANUAL DE USUARIO
VERSION 1.0
UDA 1 UDA 2 UDA 4

4. CONNECTION

To connect the UDA 1, UDA 2 or UDA 4 to the barrier terminal strip remove the metallic cover on the
rear side of the unit, get loose the nut of the cable gland, insert the cable and connect the two wires
paying attention to the polarity. Then attach the metallic cover in place and screw the nut of the cable
gland again.
To avoid acoustic cancellations please make sure that all the UDA units are connected with the correct
polarity to the amplifiers.

5. ACCESSORIES

Wall 4V (Included)

Wall 4V is a wall mounting accessory (included with each unit) that allows the column to be aimed up
to +/- 50° sideways and from 30° downwards.
UDA SERIES
UDA 1, UDA 2, UDA 4 www.workpro.es 6