Descargar Imprimir esta página

NORRIEZ MDK-809 Manual De Usuario página 9

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

protection
How to use:
Ultra-small, cordless, and easy to carry
1: Full charging before first using.
How to use:
2: Switch on from temperature level 1 ( 140°C / 290°F). And the default
Before using the hair curler, fully charge it for best
heating time is 8 seconds.
performance.
3: Wait for the curler to heat up. The heating sign will stop flashing with
To turn on the curler, press the "Power ON/OFF" button and
'beep' notice in 2 minutes.
hold it for 2 seconds. You will hear a "beep" and then the LCD
4: Curling steps: Put in your hair, then press the curling button and hold it.
display will appear.
For the first 9s, the hair will be well rotated on the heated iron. Then,
To turn off the hair curler, press "Power ON/OFF" and hold it
for 2 seconds.
timer starts counting with beeps. You could not release the button until
Note:
you hear all 'beep' finished (Note: the beep count depends on the time
Even if you forget to turn off the curler, it will switch off
you set. When beeping, the curler is styling your hair).
automatically after 10 minutes.
5: Remove the hair and repeat step 4.
Press "Menu/
6: You can set different heat levels and curler timers for your hair.
Press "Adjustment/▲" to adjust.
Note:
7: Long press the 'Temperature Set Button' until the temperature sign
Temperature: 150°C/ 160°C/ 170°C/ 180°C/ 190°C/ 200°C or 300
flashes. Then, release and long press the 'Temperature Set Button'
°F/ 320°F/ 340°F /360°F /380°F /390°F
again to set °C to °F. It shares the same steps when setting °F to °C.
Direction: Left or Right.
8: Short press the ' power button ' to set the timer 8-18 seconds,
Timer: 8s, 10s, 12s, 14s, 16s, 18s.
Long press the ' power button ' to turn on/off
The hair curler will begin to heat within 5 seconds after you
select the temperature.
9: The curler will contain your last setting.
Note: the heating symbol will blink while the curler heats. lt
will stop blinking and you will hear a "beep-beep" when it
Note
:
reaches the selected temperature.
1: Temperature: 140°C/ 160°C/ 180°C / 200°C or 290°F/ 320°F /360°F/
Comb through your hair when it is dry to remove any tangles
390°F
and divide your hair into smaller sections, each no more than
2: Timer: 8s, 10s, 12s,14s,16s,18s
0.4 inches wide.
Place the bottom of each section of your hair in the curling
3: If temperature setting changed, curler needs 5s to re-heat.
chamber and press "START" button to activate the motor and
4: To avoid stuck hair while curling, please use on dry hair only. And
draw hair into the curling chamber.
make sure hair well-combed before curling. And curling no wider than
Release "START" button when you hear the first beep.
0.3 inches hair each time.
Automatic curling is complete when you hear a series of
beeps. The number of beeps depends on the time you select.
Tips
For example, if you select 8 seconds, you will hear 8 beeps.
1: Fully charge before long time storage and recharge every 3 months
to keep it in the best condition.
2: Battery capacity could be read from the LCD display.
Tips
3: Better not using this curler while charging. Or battery life will reduce.
Before using, fully charge the hair curler to experience the
4: If your hair gets caught in the curling chamber, you will hear
best performance.
If you plan to keep the hair curler in storage for a long time
■ " to select temperature, direction, and time.
7

Publicidad

loading