See "Replacement Filters" in the "Assistance or Service" section.
Use of a non-Whirlpool filter or failure to replace the filter regularly
will invalidate this warranty.
1. Press POWER to turn off the air purifier.
2. Unplug air purifier or disconnect power.
3. Place fingers on the front release tabs. Gently push the tabs
in and pull the front grille forward to remove it.
4. Remove and replace the indicated filter. Install the new HEPA
filter in the same direction shown by the arrow located on the
filter frame. Install the new pre-filter by placing it on the tabs.
NOTE: Do not try to wash and reuse either the HEPA filter or
the pre-filter.
First try the solutions suggested here and possibly avoid the cost of a service call...
Air purifier will not run
Check the following:
Is the air purifier turned on?
Before calling for assistance or service, please check
"Troubleshooting." It may save you the cost of a service call. If
you still need help, follow the instructions below.
Call the Customer Service Center toll free: 1-866-990-7365.
Our consultants provide assistance with:
Features and specifications on our full line of appliances.
Installation information.
Use and maintenance procedures.
Accessory and repair parts sales.
Specialized customer assistance (Spanish speaking, hearing
impaired, limited vision, etc.).
Referrals to local dealers, repair parts distributors and service
companies. Designated service technicians are trained to
fulfill the product warranty and provide after-warranty service,
anywhere in the United States and Canada.
Replacement filters may be ordered by calling our Customer
Service Center at 1-866-990-7365.
You may also visit our website www.whirlpoolairpurifiers.com.
NOTE: This information is also located on the HEPA filter for your
convenience.
For 30 days from the date of purchase, if you are not completely satisfied that your new Whirlpool
your previous high-efficiency air purifier, Master Brands HK Limited will take it back and refund the full purchase price to you. (Finance
and shipping charges are not included.) Contact the Customer Service Center toll-free at 1-866-990-7365 for money-back guarantee
procedures.
6
5. Place the bottom tabs on the front grille into slots in the base
6. Plug in air purifier or reconnect power.
7. Press POWER to start the air purifier.
8. Press either the PRE-FILTER RESET or the HEPA RESET
TROUBLESHOOTING
ASSISTANCE OR SERVICE
When calling, please know the purchase date and the complete
model and serial number of your appliance. This information will
help us to better respond to your request.
In the U.S.A. and Canada
For further assistance
If you need further assistance, you can write to Master Brands
HK Limited with any questions or concerns at:
Please include a daytime phone number in your correspondence.
Replacement Filters
Air Purifier
Model No.
AP51030K
Quiet 30-Day Money-Back Guarantee
Get other manuals https://www.bkmanuals.com
of the air purifier. Push the top of the grille forward until the
grille locks into place.
button for 5 seconds to turn off the filter indicator light(s) and
reset timer.
Is the power cord plugged into a grounded 3 prong outlet?
Has a household fuse blown, or has a circuit breaker tripped?
Replace the fuse or reset the circuit breaker. If the problem
continues, call an electrician.
Was a regular fuse used? Use a time-delay fuse or time-delay
circuit breaker.
To locate the designated service company in your area, you
can also look in your telephone directory Yellow Pages.
Master Brands HK Limited
c/o CCRG Teleservices
4240 Ridge Lea Road, Ste. 29
Amherst, NY 14226
HEPA Filter
Replacement
Part No.
1183054K
®
Whispure
Pre-Filter
Replacement
Part No.
8171434K
™
air purifier is quieter than